10 Kg Wooden Oil Machine, 2 HP

Best 10 kg Wooden Oil Machine

This is the smallest press in our wooden range, made for a household or a small shop. Here is what you should know first.

• Presses about 10 kg of seed an hour
• About 80 kg of seed in an eight hour day
• Runs on a 2 HP motor in single phase or three phase
• Starts at ₹1,20,000 plus GST
• Made at our Coimbatore works and dispatched across India

Fitting It Into Small Spaces

Space is often the deciding factor for a home or shop front unit, so measure before you order. The press needs a floor of 3 by 1.5 feet and stands about 4 feet tall, so check for a low roof or shelf above it. Leave a walking gap on every side. Place it in a dry, level corner or on a verandah, away from splashing water and keep a 230 V point within easy reach. Add table space nearby for seed sacks, containers and oil filtering, because a small press still needs a tidy working area to run each day.

2 HP Wooden Oil Machine Specifications

A small press still needs honest engineering and this 2 HP wooden oil machine states its parts. The main shaft is EN19 grade hardened material, which carries the turning load. Wherever seed and oil touch the machine, the hopper and oil tray are stainless steel 304, a common choice for food contact. The 2 HP motor runs the press in automatic operation, on 230 V in single phase or 415 V in three phase and the frame measures 3 by 1.5 by 4 feet. If another supplier leaves these facts out of a datasheet, ask why before you compare prices.

Choosing Between Single and Three Phase

Your electrical connection is the one thing you cannot change cheaply, so let it pick the model. Use these points.

• Single phase, 230 V: the common supply in homes and small shops
• Three phase, 415 V: for shops that already have three phase wiring
• Both give the same 10 kg an hour
• The three phase version differs in motor supply, not in oil output
• Ask your electrician which supply you have, then tell us

Best Marachekku Machine for Home Use

A steady routine matters more than speed with a small press. Try this order on your first days and adjust it once you know your seed.

1. Sort stones and dust out of the seed before it reaches the hopper
2. Keep the next batch measured and ready while one is running
3. Filter the oil after each batch, not at the end of the day
4. Wipe the stainless steel tray whenever you change seed
5. Note the seed weight and oil collected, so you learn your own yield

Your First Week With It

Treat the first week as a learning period. Before delivery, pick a dry corner and ask your electrician to confirm the 230 V point. Once we have commissioned the press, start with a few small batches of a single seed, so you can see how the machine behaves and how much oil it gives. Write down the seed weight, the pressing time and the oil volume each day, because those numbers become your own yield guide. Keep the tray and hopper clean between seeds and store the filtered oil in clean containers. If anything looks unclear, call our sales number.

10 kg Wooden Oil Machine Price

Whatever wooden oil machine price you see quoted, ask what sits inside it. Ours starts at ₹1,20,000 plus GST, ex-works Coimbatore and that is the price of the press alone. It is the lowest price in our wooden range. The three phase version costs slightly more and we confirm the figure when we speak. Freight to your district and installation at your place are added on top and Perfect Engineerings writes each amount on its own line in the quote, sent within one working day. That way you can set our offer beside any other and compare like with like.

What the Price Does Not Include

The listed machine price covers the press itself. The following costs may be quoted separately based on your order and site requirements:

• GST
• Freight to your district
• Installation at your site
• Oil filter, if required
• Spare parts, if required