7.5 HP Three Phase Cold Press Oil Expeller

7.5 HP Cold Press Oil Expeller

This press suits a mill that wants screw pressing without paying for a bigger motor. Here is what comes fitted with it.

• Made for 40 to 60 kg of seed an hour
• Crompton 7.5 HP motor at 960 rpm
• Reverse forward switch built into the unit
• Three 1000 W tubular heaters fitted inside
• Hopper and tray in stainless steel 304
• One year warranty from our works

Chamber, Rings and Shaft Details

Start with the shaft: an EN19 grade hardened shaft carries the load through fourteen rings fitted along a 17.5 inch chamber. Each ring has an 80 mm bore and a 120 mm outer diameter. Inside the unit sit three tubular heaters of 1000 W each and a reverse forward switch. Stainless steel 304 forms the hopper and oil tray. With a footprint of four by two by five feet, the compact frame suits a small mill and our staff send spares from Coimbatore on request. All figures sit in the sheet below so you can compare models side by side.

7.5 HP Cold Press Machine Benefits

Think of this 7.5 HP cold press machine as the first step from a rotary to a screw press. A Crompton 7.5 HP motor on three phase power turns the shaft, which keeps pressing steady through the working day. Because the motor is smaller than on our 10 HP press, your starting investment stays lower. The EN19 shaft and stainless steel 304 hopper match the grades we fit on our 10 HP press, so upgrading feels familiar. Your operators control shaft direction with the reverse forward switch. Before dispatch, our staff confirm your supply and guide commissioning at your mill.

Which Cold Press Size Fits You

Wondering if 7.5 HP is enough for your mill? This quick comparison shows where each size fits.

• 7.5 HP: 40 to 60 kg an hour, the entry size
• 10 HP: 100 to 150 kg an hour
• 15 HP: 150 to 200 kg an hour
• 20 HP: up to 300 kg an hour
• Match the size to your daily seed quantity

Cold Press Oil Expeller Price Details

Our rate for this model is open and easy to check. Here is how the figure breaks down.

• Price: ₹1,90,000 ex-works Coimbatore, plus GST
• Freight and installation quoted by district
• Written quote from our team in one working day
• Larger models are listed in the table above

How We Prepare Your Quote

Asking for a quote is simple and carries no pressure. Fill in the form with your company email and phone or tap WhatsApp and one of our staff will call you to learn about your seed, your daily output target and your power supply. Within one working day you will receive our written quote. GST, freight and installation are added by district to the ex-works Coimbatore rate. Each amount appears on its own line. We answer messages Monday to Saturday, 9:00 to 19:00 IST and we are always glad to compare it with the larger 10 HP model for you.

Small Oil Mill Machine Output Details

Owners of small mills choose our small oil mill machine when they want a first step up from a rotary press. At 40 to 60 kg an hour, an eight hour shift handles 320 to 480 kg of seed. Feeding the press evenly keeps the load steady and the oil flowing smoothly. Perfect Engineerings builds this press for modest daily volumes and our staff will gladly help you choose between 7.5 HP and larger models before you order. Start with this size if your daily seed quantity is small and move up to a bigger press as your business grows.

Site Readiness Checklist Before Delivery

A little planning before delivery keeps commissioning smooth. Run through this list with your electrician and builder.

• Check that three phase power reaches your shed
• Fit proper earthing for the 7.5 HP motor
• Allow room beyond the 4 x 2 x 5 ft frame
• Use a level concrete floor inside a covered area
• Set aside space for seed storage and filtering
• Perfect Engineerings will guide your layout and installation