10 HP Three Phase Cold Press Oil Expeller

10 HP Cold Press Oil Expeller

This press is built for mills that run a shift every day. Here is who it suits and what it carries.

• Mills pressing 100 to 150 kg of seed an hour
• Groundnut and sesame mills running a shift a day
• Crompton 10 HP motor at 960 rpm, three phase
• Reverse forward switch and three heaters built in
• One year warranty on every press

Inside the 22 Inch Chamber

Pressing quality is decided inside the chamber, so we look there first. The 22 inch barrel holds 17 rings, each with a 100 mm bore and a 150 mm outer diameter and a hardened EN19 grade shaft turns through them. Three tubular heaters of 1000 W each sit inside the unit and a reverse forward switch gives you control of shaft direction. The frame measures 5 by 3 by 4 feet, so allow room around it. Our own staff send spares from the Coimbatore factory on request and every figure sits in the sheet below so you can compare models.

Groundnut Oil Press Machine Output

Mill owners who want a groundnut oil press machine usually count seed by the shift. At 100 to 150 kg an hour, this press handles roughly 800 to 1,200 kg in an eight hour shift at the stated rating. It suits groundnut and sesame mills that run a shift a day. Clean, dry seed protects the shaft and gives better oil and feeding at an even rate keeps the load steady. Share your seed type and daily target with our team and we will confirm whether 10 HP is the right size or whether another model suits your mill better.

10 HP Versus 15 HP Press

Both presses run on three phase power and share the same build quality. Use these points to pick the right size.

• 10 HP: 100 to 150 kg an hour, ₹2,60,000 plus GST
• 15 HP: 150 to 200 kg an hour, ₹3,50,000 plus GST
• Pick 10 HP for about a tonne a shift
• Pick 15 HP if your mill needs more than 150 kg an hour
• Our team confirms the match before you order

Three Phase Cold Press Machine Benefits

A three phase connection gives this press a steady working base. Here is what you get from it.

• Steady shaft speed at 960 rpm through the working day
• Capacity of 100 to 150 kg an hour
• Inbuilt reverse forward switch for shaft direction
• Three 1000 W tubular heaters fitted inside
• Commissioning support at your site, anywhere in India

Moving Up From the 7.5 HP

Perfect Engineerings builds four cold press sizes, so you can see what 10 HP adds. Compared with our 7.5 HP press, this model handles 100 to 150 kg an hour instead of 40 to 60 kg, on a larger frame of 5 by 3 by 4 feet and a 22 inch chamber with 17 rings. If you need more than 150 kg an hour, our 15 HP press covers 150 to 200 kg and the 20 HP press reaches up to 300 kg. Click a model below for its datasheet or tell us your daily volume and we will advise.

10 HP Cold Press Machine Price

Our 10 HP cold press machine price is ₹2,60,000 ex-works Coimbatore, plus GST. That is ₹70,000 more than the 7.5 HP press and ₹90,000 less than the 15 HP press, for a clear step up in output at each size. Freight to your district and installation at your site are quoted with the machine, on separate lines, so you can compare our offer with any other. Tell us your seed type and power supply by form or by WhatsApp and our team will call you, confirm that 10 HP fits and send you a written quote within one working day.

Preparing Your Shed for Installation

A little planning keeps delivery day calm. Run through this list with your electrician and builder.

• Three phase supply sized for the 10 HP motor
• Proper earthing at the machine point
• Room beyond the 5 x 3 x 4 ft frame for feeding and cake removal
• Level concrete floor under a covered roof
• Separate corner for seed storage and filtering
• Perfect Engineerings will plan your layout with you