Pawan Jha
Excellent service and very good quality machine. The team is professional, supportive and knowledgeable. They explained everything clearly and provided excellent guidance throughout the process. Highly recommended!
Home Machines Coconut Processing Copra Cutter
Coconut Processing
Copra Cutter Machine
Also known as Copra Cutting Machine, Coconut Copra Cutting Machine, Copra Machine, Khopra Cutter
Copra machine for oil mills and copra yards: copra cutting machine in single and three phase, 300 to 500 kg per hour. Made in Coimbatore, Tamil Nadu; supplied across India.
Made in Coimbatore, Tamil Nadu. Installed and serviced across India.
- Capacity
- 300 kg / hr7.2 t/day
- Motor
- 3 HP
- Phase
- Three
- ISO 9001:2015
- Manufactured in Coimbatore
- across India
1 Year Warranty
ISO 9001:2015 Certified Works
Shipping Across India
Copra Cutter Machine for Mills
Dried copra must reach the press in pieces, so mills fit a copra cutter machine ahead of it. An uncut half stalls the screw and drops the oil yield. Our copra cutter chops 300 or 500 kg an hour into press size pieces using EN8 blades on a 3 HP motor, in either single phase or three phase. The pieces feed straight into the rotary or the cold press expeller. Perfect Engineerings builds the machine at its Coimbatore works, ships it to mills across India and commissions it at your site, with spares and service coming from the same works.
Copra Cutter Machine Sizing Steps
Sizing a copra cutter machine starts with the copra your press takes. Work through these steps before you request a quote.
- Weigh the copra your mill cuts on a busy day.
- Divide that weight by 300 or 500 kg to get machine hours.
- Check the hours against the shift table below.
- Pick single phase or three phase to match your supply.
- Send your figures to our team for a sizing opinion.
Copra Cut Per Hour and Shift
| Working hours | 300 kg per hour model | 500 kg per hour model |
|---|---|---|
| 4 hours | 1,200 kg | 2,000 kg |
| 6 hours | 1,800 kg | 3,000 kg |
| 8 hours (one shift) | 2,400 kg | 4,000 kg |
| 10 hours | 3,000 kg | 5,000 kg |
| 12 hours | 3,600 kg | 6,000 kg |
| 24 hours | 7,200 kg | 12,000 kg |
Figures use rated capacity. Real output depends on copra moisture and piece size.
Copra Cutting Machine India
A copra cutting machine is quoted per model, so every enquiry gets a written figure within one working day. The family has four versions, 300 or 500 kg an hour, each in single phase or three phase, so the quote follows your throughput and your supply. The figure is ex-works Coimbatore plus GST, with freight and installation to your district shown separately. When you compare suppliers across India, ask for the rated capacity, the blade grade and the grid options, because cutters sold under one name can differ in all three. Weigh each offer against the copra you cut daily.
Copra Cutting Machine Quote Factors
| Factor | How it affects the quote |
|---|---|
| Capacity | 300 or 500 kg per hour |
| Phase | Single phase 230 V or three phase 415 V |
| Motor | 3 HP |
| Delivery district | Sets freight and installation |
| GST | Added to the ex-works price |
| Extras | Quoted as separate lines |
Quote Freight and Installation Steps
Getting a written quote for a copra cutting machine takes one working day. Freight and installation are quoted to your district.
- Send your daily copra weight and your power supply.
- Receive the written quote within one working day.
- Choose 300 or 500 kg an hour, single or three phase.
- We ship the cutter from our works to your district.
- Our team commissions it at your site.
Call +91 93456 10107 or message us on WhatsApp.
Khopra Cutter Machine Models
The khopra cutter machine works on a simple principle. Copra halves are fed into a rotor carrying hardened EN8 blades and the pieces fall through a grid sized for the press. The rotor runs at 960 to 1440 rpm on a 50 Hz supply, inside a compact powder coated mild steel body. The grid can be changed for a finer cut and the cake cutter version also chops oil cake for cattle feed. Replacement blades ship from the works, so a worn set can be swapped instead of replacing the machine and the machine keeps cutting through every busy season.
Khopra Cutter Machine Specification Sheet
| Specification | 300 kg single phase | 300 kg three phase | 500 kg single phase | 500 kg three phase |
|---|---|---|---|---|
| Capacity | 300 kg / hr | 300 kg / hr | 500 kg / hr | 500 kg / hr |
| Motor Power | 3 HP | 3 HP | 3 HP | 3 HP |
| Phase Type | Single | Three | Single | Three |
| Power Supply | 230 V | 415 V | 230 V | 415 V |
| Dimension in ft | 3 x 1.5 x 4 | 3 x 1.5 x 4 | 3 x 2 x 4 | 3 x 2 x 4 |
| Material | Mild Steel | Mild Steel | Mild Steel | Mild Steel |
| Operation Type | Automatic | Automatic | Automatic | Automatic |
| Machine Speed | 960 - 1440 RPM | 960 - 1440 RPM | 960 - 1440 RPM | 960 - 1440 RPM |
| Frequency | 50 Hz | 50 Hz | 50 Hz | 50 Hz |
| Cutting Blade | EN8 | EN8 | EN8 | EN8 |
| Price | Quoted per model | Quoted per model | Quoted per model | Quoted per model |
Phase and Site Power Checklist
Installing a khopra cutter machine takes a little planning. Check these points with your electrician and builder.
- Single phase at 230 V or three phase at 415 V.
- Cable size and protection suited to the 3 HP motor.
- Floor space of 3 by 1.5 feet for 300 kg, 3 by 2 feet for 500 kg.
- A feed point wide enough for copra halves.
- A clear route from the cutter to the press.
Copra Cutter for Oil Mills
Choosing a copra cutter for oil mills is easier when one works supplies the whole coconut line. Perfect Engineerings builds the de-husker, copra cutter, rotary or expeller press, filter press and bottle filler and installs them as one line sized to the nuts you handle each day. The works is ISO 9001:2015 certified and the founder, Mr. Kuppusamy Velumani, has 25 years of engineering behind it. On site, the cutter is run at its rated capacity on your own copra before we leave and your operator is trained the same day. Wear parts and blades ship by courier from Coimbatore.
Copra Cutter for Oil Mills Line
| Step | Machine | What it does |
|---|---|---|
| 1 | Coconut dehusker | Removes the husk from the nut |
| 2 | Multipurpose electric dryer | Dries the kernel to copra |
| 3 | Copra cutter (this page) | Cuts copra into press size pieces |
| 4 | Rotary press or oil expeller | Presses the oil |
| 5 | Filter press and bottle filler | Clears and packs the oil |
Cutting first raises the yield and protects the press.
Service and Spares Across India
After purchase, support for your copra cutter machine depends on what you agree before ordering. Confirm these items.
- Installation on your site, run at rated capacity on your copra.
- Operator training on the same day.
- Warranty period stated on the written quote.
- Branded motors that carry their own maker warranty.
- Blades and wear parts shipped by courier from Coimbatore.
- Service calls answered by the team that built the machine.
Call +91 93456 10107 or +91 63695 10107.
Reviews
What customers say
Jitendra Kumar Gupta
Best quality product. Service is also good. Highly recommended.
Aanjikya Shukla
Very happy with their services. The machine quality is outstanding. We have been using their machine for 3 years now and it is working smoothly. The Perfect Engineering team is always there to help whenever required. Definitely recommended.
TravelTime
Excellent experience from the time we consulted them, then buying the machinery and a very good demo session. What stands out is the customer service to answer our doubts anytime.
Sandeep Gupta
The quality and make of machines are good. We are very satisfied and content with quality and performance. Support of the company is also good.
Yash Bhatt
Great experience, we got this machine from Gujarat. Very fast delivery, very good rate, very good accurate work. As per the name, yes it's perfect.
Copra Cutter Machine FAQs
What is a copra cutter machine used for?
A copra cutter machine cuts dried coconut kernel, called copra, into small pieces ready for the oil expeller. Cutting first raises the oil yield and protects the press, because an uncut half stalls the screw. This family cuts 300 or 500 kg an hour on a 3 HP motor.
Is there a single phase copra cutting machine?
Yes. Both the 300 kg and the 500 kg an hour cutters are built with a 3 HP single phase motor on 230 V, as well as in three phase on 415 V. Choose by the supply on your site and tell our team when you ask for a quote.
What does a khopra cutter machine cost?
The cutter is quoted per model within one working day, ex-works Coimbatore plus GST, with freight and installation to your district shown separately. Tell our team your daily copra weight and power supply and ask for extras as separate lines.
Which size copra cutter for oil mills do I need, 300 or 500 kg?
Choose by your daily copra. A copra cutter for oil mills at 300 kg an hour cuts about 2,400 kg in a shift, while the 500 kg model cuts about 4,000 kg. Send your daily weight and supply to our team and we will recommend the size for your press.
What size pieces does the copra cutter make?
Press size pieces that the rotary or cold press expeller takes without stalling. The grid can be changed for a finer cut and the cake cutter version also chops oil cake for cattle feed. See the oil cake shredder machine for cake.
Can the copra cutter be part of a copra crushing plant?
Yes. A copra crushing plant from our works is the de-husker, copra cutter, rotary or expeller press, filter press and bottle filler, sized to the nuts you handle each day and installed as one line. Share your daily nut count with our team for a plan.
