HomeMachinesCoconut ProcessingCopra Cutter300 Kg Copra Cutter
300 Kg Copra Cutter
The same 300 kg cutter for three phase sites.
Made in Coimbatore, Tamil Nadu. Installed and serviced across India.
- Capacity
- 300 kg / hr
- Motor
- 3 HP
- Phase
- Three
- ISO 9001:2015
- Manufactured in Coimbatore
- across India
1 Year Warranty
ISO 9001:2015 Certified Works
Shipping Across India
300 Kg Copra Cutter Overview
Coconut oil mills that press copra need a 300 kg copra cutter to prepare the feed before it reaches the expeller. This three phase model from Perfect Engineerings cuts 300 kg an hour on a 3 HP motor, which suits mills handling a few tonnes of copra a day. Copra is cut first and the pieces then go to the oil expeller for pressing. The machine is built at our Coimbatore works, shipped across India and commissioned at your site and the same works supplies the spares and service that keep the cutter running through every season of your mill.
300 Kg Copra Cutter Capacity Guide
Sizing a 300 kg copra cutter starts with your own numbers. Work through these steps before you request a quote.
- Weigh the copra your mill uses on its busiest day.
- Note how many hours the cutter will run each day.
- Divide the daily weight by those hours to get kg per hour.
- Compare that figure with the shift table below.
- Allow headroom for growth in your copra intake.
- Send the figures to our team for a sizing opinion.
Copra Cutter Output Per Shift
| Working hours | Copra cut at 300 kg per hour |
|---|---|
| 4 hours | 1,200 kg |
| 6 hours | 1,800 kg |
| 8 hours (one shift) | 2,400 kg (2.4 tonnes) |
| 10 hours | 3,000 kg (3.0 tonnes) |
| 12 hours | 3,600 kg (3.6 tonnes) |
| 24 hours | 7,200 kg (7.2 tonnes) |
Copra Cutting Machine Price
The copra cutting machine price for this model is quoted per order, so every enquiry receives a written figure rather than a list price. This lets us confirm the model, the power supply and the delivery district before we commit to a number. The quote is ex-works Coimbatore plus GST and freight and installation to your district are shown with it. When you compare suppliers, ask each one for the rated capacity, the motor size and the blade grade, because two cutters with the same name can differ in all three. Judge each quote against your own daily copra volume.
Copra Cutting Machine Price Factors
| Factor | How it affects the quote |
|---|---|
| Model | 300 kg per hour, three phase, 3 HP |
| Power supply | Three phase, confirmed against your site |
| Delivery district | Sets freight and installation |
| GST | Added to the ex-works price |
| Extras | Quoted as separate lines |
Quote Freight and Installation Steps
Getting a written copra cutting machine price takes just one working day. Freight and installation are quoted to your district.
- Send your daily copra weight, power supply and district.
- Receive the written quote within one working day.
- Confirm the model and any extras you want.
- We ship the cutter from our works to your district.
- Our team commissions it at your site.
Three Phase Copra Cutter India
Choosing a three phase copra cutter makes sense when your mill already runs three phase power for its expeller and other motors. This model is otherwise identical to our single phase cutter of equal capacity, with the same frame, blades and 960 to 1440 rpm speed range, so the choice comes down to your power supply and not to cutting design. The table below lists the full datasheet for this model. Wherever your mill is located in India, check the connection with an electrician before ordering and tell our sales team if you are unsure which version suits your site.
Three Phase Copra Cutter Specifications
| Specification | Details |
|---|---|
| Capacity | 300 kg / hr |
| Motor Power | 3 HP |
| Phase Type | Three |
| Dimension in ft | 3 x 1.5 x 4 |
| Material | Mild Steel |
| Operation Type | Automatic |
| Machine Speed | 960 - 1440 RPM |
| Frequency | 50 Hz |
| Cutting Blade | EN8 |
| Power Supply | 230 V |
| Brand | Perfect Engineerings |
| Country of Origin | India |
| Price | Quoted per order, ex-works Coimbatore + GST |
Power and Floor Space Checklist
Installing a three phase copra cutter takes a little planning. Check these points with your electrician and builder.
- Three phase supply at your site, with the voltage confirmed.
- Cable size and protection suited to the 3 HP motor.
- Floor space for the frame, plus room to load copra.
- A clear spot for cut copra to collect or move on.
- A route from the cutter to your oil expeller.
- Dust and guard safety around the moving blades.
3 HP Copra Cutter Machine
A 3 HP copra cutter machine is a small purchase but it keeps the whole pressing line fed, so the maker matters. Perfect Engineerings builds every unit at its own works in Coimbatore under an ISO 9001:2015 certified system. Our founder, Mr. Kuppusamy Velumani, brings 25 years of engineering experience to the range. Spares and service come from the same works, so any question about the cutter reaches the people who built it. You can verify our company profiles on IndiaMART and TradeIndia before you order or call our sales team with any pre-sales question about layout, power or delivery.
3 HP Copra Cutter Machine Models
| Feature | Single phase model | Three phase model (this page) |
|---|---|---|
| Capacity | 300 kg / hr | 300 kg / hr |
| Frame and blades | Same | Same |
| Speed range | 960 - 1440 RPM | 960 - 1440 RPM |
| Power supply | Single phase | Three phase |
| Price | Quoted per order | Quoted per order |
Service and Spares Across India
After purchase, support for your 300 kg copra cutter depends on what you agree before ordering. Ask the works for these items.
- Warranty terms written on your quote.
- A list of blade and wear parts, with prices.
- The installation schedule for your district.
- Delivery timeline confirmed in writing.
- Spares and service from the same works.
- Sales support Monday to Saturday, 9 am to 7 pm.