Dineshan K V
I have purchased 2 machines from Perfect Engineering recently for export. Very good company with genuine people. Ms. Geetha coordinated well and helped me a lot and the whole process was very smooth.
Home Machines Farm and Biomass Wood Chipper
Farm and Biomass
Wood Chipper Machine
A towable wood chipper on a petrol or diesel engine of 7.5 to 13.5 HP that chips 800 kg of branches, fronds and pruning waste an hour into mulch or boiler fuel. No electrical supply is needed, so it works on the estate…
Made in Coimbatore, Tamil Nadu. Installed and serviced across India.
- Capacity
- 800 kg / hr19.2 t/day
- Phase
- Engine driven
- ISO 9001:2015
- Manufactured in Coimbatore
- across India
1 Year Warranty
ISO 9001:2015 Certified Works
Shipping Across India
Wood Chipper Without Electricity
Estates and farms clearing branches and pruning waste need a wood chipper machine that works where the waste lies. This towable model from Perfect Engineerings chips about 800 kg an hour of branches, coconut fronds and farm wood waste on its own 7.5 to 13.5 HP petrol or diesel engine. It needs no electrical supply, so it works anywhere on the farm. The chips go down as mulch, into compost or dry as boiler fuel. The unit is built at our Coimbatore works, then shipped and commissioned across India and the same works supplies spares and service for every machine.
Wood Chipper Machine Capacity Guide
Sizing a wood chipper machine starts with your own waste volume. Work through these steps before you request a quote.
- Estimate the branches and fronds you clear on a busy day.
- Note how many hours the chipper will run each day.
- Divide the daily weight by those hours to get kg per hour.
- Compare that figure with the shift table below.
- Allow headroom for seasons when more waste falls.
- Send your figures to our team for a sizing opinion.
Chipper Output Per Shift and Day
| Working hours | Chips produced at 800 kg per hour |
|---|---|
| 4 hours | 3,200 kg |
| 6 hours | 4,800 kg |
| 8 hours (one shift) | 6,400 kg (6.4 tonnes) |
| 10 hours | 8,000 kg (8.0 tonnes) |
| 12 hours | 9,600 kg (9.6 tonnes) |
| 24 hours | 19,200 kg (19.2 tonnes) |
Figures use rated capacity. Real output depends on the material you feed.
Diesel Engine Wood Chipper India
A diesel engine wood chipper suits estates where no power line reaches the work area. The engine is built into the machine and rated between 7.5 and 13.5 HP, with petrol or diesel options, so it starts wherever fuel can reach. Each model is quoted individually within one working day and the written quote shows freight and commissioning to your district. When you compare suppliers across India, ask for the engine rating, the fuel type, the rated chipping capacity and the knife arrangement, because machines of the same name can differ in all four. Decide using your daily waste volume.
Diesel Engine Wood Chipper Price Factors
| Factor | How it affects the quote |
|---|---|
| Engine rating | 7.5 to 13.5 HP |
| Fuel type | Petrol or diesel |
| Capacity | About 800 kg per hour |
| Delivery district | Sets freight and commissioning |
| GST | Added as applicable |
| Extras | Quoted as separate lines |
Quote Freight and Commissioning Steps
Getting a written quote for a diesel engine wood chipper takes one working day. Freight and commissioning are quoted to your district.
- Send your daily waste, engine preference and district.
- Receive the written quote within one working day.
- Confirm the model and any extras you want.
- We ship the chipper from our works to your district.
- Our team commissions it at your site.
- Call +91 93456 10107 or message us on WhatsApp.
Towable Wood Chipper for Estates
A towable wood chipper goes to the far corner of an estate behind a jeep or a tractor, so the waste never has to be carried to the machine. It tows on its own wheels, carries its own engine and needs no PTO, no tractor power and no power line. On a footprint of 2.5 by 2.5 feet it stores in a shed between clearings. Branches and fronds go into the angled chute butt first and the feed rollers draw them in at a steady rate. Plan a towing vehicle and a clear route to your work area before ordering.
Wood Chipper Specification Sheet
Specification sheet
- Capacity
- 800 kg / hr
- Phase Type
- Engine driven
- Engine
- 7.5 to 13.5 HP
- Dimension in ft (L x B x H)
- 2.5 x 2.5 x 5
- Mounting
- Towable, on its own wheels
- Usage
- Branches, coconut fronds and farm wood waste
- Feed
- Angled chute with feed rollers
- Cutting drum
- Hardened steel with replaceable knives
- Discharge
- Swivel chute
- Price
- Quoted per model
- Brand
- Perfect Engineerings
- Country of Origin
- India
Field Safety Checklist
Using a towable wood chipper safely takes a little planning. Review these points before the first run.
- A jeep or tractor to tow it to the work area.
- A clear route and firm ground for the wheels.
- Fuel for the engine, kept ready before each run.
- Branches fed butt first into the angled chute.
- Operator kept clear of the feed rollers and drum.
- A trailer or open ground ready for the chips.
- Thicker trunk wood cut to size before feeding.
Coconut Frond Chipper Maker
A coconut frond chipper works in dust, dry fronds and hard branches, so the maker behind it matters. Perfect Engineerings builds every single unit at its own works in Coimbatore under an ISO 9001:2015 certified system. Our founder, Mr. Kuppusamy Velumani, brings 25 years of engineering experience to the range. Spares and service come from the same works, so any question about the chipper reaches the people who actually built it. You can verify our company profiles on IndiaMART and TradeIndia before you order or call our sales team directly with any pre-sales question about the engine, towing or delivery.
Wood Chipper Buying Checklist
| Question to ask any supplier | Why it matters |
|---|---|
| Engine rating and fuel | Decides running cost and where it can work |
| Rated capacity | Must match your daily waste volume |
| Maximum branch size | Decides what you can feed without cutting first |
| Replaceable knives | Controls running cost over the seasons |
| Spares source | Decides how long the machine sits idle |
Service and Spares Across India
After purchase, support for your wood chipper machine depends on what you agree before ordering. Ask the works for these items.
- Warranty terms put in writing on your quote.
- Knife turning and replacement from the works.
- A spare knife list, with prices.
- Delivery timeline confirmed in writing.
- Spares and service from the same works.
- Sales support Monday to Saturday, 9 am to 7 pm.
- Call +91 93456 10107 or +91 63695 10107.
Reviews
What customers say
DINESH KUMAR.R
I had a very good experience purchasing this oil machine. The machine quality is excellent and its performance is very good. The company team was also supportive and responsive throughout the process. Highly recommended!
Pawan Jha
Excellent service and very good quality machine. The team is professional, supportive and knowledgeable. They explained everything clearly and provided excellent guidance throughout the process. Highly recommended!
Jitendra Kumar Gupta
Best quality product. Service is also good. Highly recommended.
Aanjikya Shukla
Very happy with their services. The machine quality is outstanding. We have been using their machine for 3 years now and it is working smoothly. The Perfect Engineering team is always there to help whenever required. Definitely recommended.
TravelTime
Excellent experience from the time we consulted them, then buying the machinery and a very good demo session. What stands out is the customer service to answer our doubts anytime.
Wood Chipper Machine FAQs
What is a wood chipper machine used for?
A wood chipper machine chips branches, coconut fronds and farm wood waste into small pieces. This towable model does it at about 800 kg an hour on its own engine. The chips are used as mulch around coconut and fruit trees, in compost or dried as fuel for boilers and gasifiers.
What is the price of a diesel engine wood chipper?
Each model is quoted individually, with a written quote within one working day. The quote shows freight and commissioning to your district. Send your daily waste volume, engine preference and district to our team and ask for any extras as separate lines so you can compare offers fairly.
Does a towable wood chipper need electricity?
No. A towable wood chipper of this model runs on its own 7.5 to 13.5 HP petrol or diesel engine, so it needs no electrical supply and no power line. It works anywhere on the farm that a jeep or tractor can tow it, so it suits far corners of an estate.
How many kg per hour does a coconut frond chipper handle?
This coconut frond chipper handles about 800 kg an hour, which is about 6.4 tonnes in an eight hour shift and 19.2 tonnes over 24 hours. Real output depends on the material you feed. Ask our team about the thickest branch you plan to chip, as thicker trunk wood is cut to size first.
Which is better, a wood chipper or a shredder?
A wood chipper machine chips branches and fronds into mulch or boiler fuel, while the farm based coconut shredder mounts on a tractor and runs from its PTO to shred husk and farm waste. Choose the chipper when you want an engine driven unit that needs no tractor power.
Does Perfect Engineerings ship the chipper across India?
Yes. Perfect Engineerings builds the wood chipper machine at its Coimbatore works, ships it across India and commissions it at your site. Spares and service come from the same works. Send your district and daily waste volume to our team and we will quote freight and commissioning with the machine.
