10 HP Rotary Oil Extraction Machine

Oil Mill Machine 60 kg Output

Planning a shift is simpler when a 60 kg oil mill machine gives you clear numbers. At the rated 60 kg an hour, output is about 480 kg in an eight hour shift, subject to operating conditions. Oil yield depends on the seed and its moisture, so ask for a figure on your own seed. Pressed cake leaves the machine separately and is dry enough to sell as cattle feed. Oil collects in the stainless steel tray and moves on to your filter press. Tell our team your seed and shift pattern and they will confirm if this size fits.

Drive Train Built for Long Shifts

This 10 HP rotary oil extraction machine relies on its drive to stay steady shift after shift. Power flows from a 10 HP Siemens motor at 960 rpm through imported belts and a crown pinion gearbox to a hardened EN 8 shaft four inches across. Branded bearings and TVS nuts hold the assembly together against constant vibration. Long shifts test every joint, so each part is chosen to carry load without fuss. Fewer stoppages mean steadier oil for your mill and operators follow one routine of feeding, pressing and collecting. Our team explains belt tension and fastener checks at commissioning.

Rotary Oil Extraction Machine 10 HP

A 10 HP rotary oil extraction machine works as a rotary version of the traditional chekku. Inside the cast ural, a steel pestle turns to crush and press seed continuously instead of in batches. Cold pressing keeps the oil aroma and natural taste, which matters to buyers of edible oil. Operation is automatic, which keeps daily feeding and collection routine. Multiseed use means one frame can press groundnut, sesame, coconut and mustard through the whole season. Feed preparation, moisture and seed variety change the yield, so ask the works for a test figure on your own seed before you order.

7.5 HP Versus 10 HP Press

Both presses share a 60 kg rating and a 6 x 2 x 6 ft frame, so the choice comes down to motor power and your hours. Use these points.

• 7.5 HP: three phase, quoted per order
• 10 HP: more motor power, ₹2,25,000 plus GST
• Both: automatic operation and FG 30 ural
• Both: hardened EN 8 shaft and stainless steel 304 hopper
• Our team will advise after hearing your daily hours

Care For Groundnut Oil Mill Machine

Daily habits keep a groundnut oil mill machine steady through long shifts. Clean the ural and hopper after each shift so residue does not build up. Feed clean, dry seed, because grit and moisture wear the shaft faster. Check belt tension and fasteners at regular intervals and grease the bearings as advised during commissioning. Wear parts ship by courier from Coimbatore and the people who built the machine answer your service call. Screening seed before feeding removes shell bits and stones, which protects the ural and the shaft. Call us for spares or a service visit from Monday to Saturday.

Other Rotary Models in Our Range

Rotary presses from Perfect Engineerings cover every scale, so you can compare before you buy. A micro press makes 20 kg an hour on a 3 HP motor, while the mini makes 30 kg an hour on a 5 HP motor and both come in single phase and three phase. Micro suits very small units, while mini suits startups and home based producers. Both 60 kg rotary presses share one frame and this 10 HP model adds motor power. Open any model below for its page or visit the main rotary oil extraction machine page to compare the full range.

Price Details: 10 HP Oil Machine

Buyers comparing the 10 HP oil machine price will find ₹2,25,000 ex-works Coimbatore, plus GST. Freight to your district and installation at your site are quoted with the machine as separate lines, so nothing is hidden. Moving up from the 7.5 HP press adds motor power on the same frame. Extra power suits longer shifts, which is worth paying for only if your hours demand it. If your mill runs lighter hours, our team will tell you when 7.5 HP is enough. Send your seed type, daily target and power supply and a written quote follows within one working day.

Installation And Service Across India

Setting up a 10 HP rotary oil extraction machine goes smoothly when the site is ready. Check these points with your electrician and builder.

• Three phase supply sized for a 10 HP motor
• Proper earthing at the machine point
• Level concrete floor in a covered shed
• Room around the 6 x 2 x 6 ft frame for feeding and cake removal
• Separate area for seed storage and oil filtering
• Installation at your site, with a first run on your own seed

Built By The Works Team

Every 10 HP rotary oil extraction machine is designed, built, shipped and serviced from one works in Coimbatore. Founder Mr. Kuppusamy Velumani brings 25 years of engineering experience to the shop floor. An ISO 9001:2015 certified system governs the works. Commissioning at your site is handled by the same team and spares come from the same works later. Service questions therefore reach the people who built the machine. Profiles of Perfect Engineerings on IndiaMART and TradeIndia are open to verify before you order. Call the sales team on +91 93456 10107 for any question about machine sizing, price or service.

What Buyers Say About Us

Buyers judge a 60 kg press by what happens after delivery, so feedback from real customers matters. One customer, Balamurugan S, bought both wooden and rotary presses from the works. Praise covered the oil output, the user friendly operation and the service and training that came with the machines. Same day operator training and a first run on your own seed are part of every installation. Share your seed, daily target and power supply and our team will size the right model for your mill. Written quotes follow within one working day, with freight and installation listed as separate lines.